STL FILE: Claw Hold for Lumbrical Recovery
This is the STL file for printing your own claw/talon hold for lumbrical recovery.
See a demo of this type of hold being used in our lumbrical recovery video: https://youtu.be/J2Q8iCcvBa4
Key Features
Taller than other similar holds on the market in order to accommodate for larger hands without affecting function for smaller hands
8mm rope hole and large recess to prevent the knot from blocking your grip
Key part of lumbrical recovery as it allows you to load the lumbricals without shifting them
Smooth surface encourages better engagement of the lumbricals compared to a relying on skin friction with a grippier surface
Minimum recommended print settings (PLA, PETG):
5 walls
5 bottom layers
15% infill.
DISCLAIMER:
This product is not a medical device and has not been evaluated or approved by any regulatory authority or third party. These products are not intended to diagnose, treat, cure, or prevent any disease or injury, and should not be considered a substitute for professional medical advice, diagnosis, or treatment. We cannot guarantee the safety, performance, or effectiveness of this product, and use of it is purely at your own risk. By purchasing and using this product, you acknowledge that Hooper’s Beta and its affiliates are not liable for any injuries, damages, or complications that may arise from its use. If you have a finger injury or suspect a pulley injury, we strongly recommend consulting a licensed healthcare provider or hand specialist before using any support device.
This is the STL file for printing your own claw/talon hold for lumbrical recovery.
See a demo of this type of hold being used in our lumbrical recovery video: https://youtu.be/J2Q8iCcvBa4
Key Features
Taller than other similar holds on the market in order to accommodate for larger hands without affecting function for smaller hands
8mm rope hole and large recess to prevent the knot from blocking your grip
Key part of lumbrical recovery as it allows you to load the lumbricals without shifting them
Smooth surface encourages better engagement of the lumbricals compared to a relying on skin friction with a grippier surface
Minimum recommended print settings (PLA, PETG):
5 walls
5 bottom layers
15% infill.
DISCLAIMER:
This product is not a medical device and has not been evaluated or approved by any regulatory authority or third party. These products are not intended to diagnose, treat, cure, or prevent any disease or injury, and should not be considered a substitute for professional medical advice, diagnosis, or treatment. We cannot guarantee the safety, performance, or effectiveness of this product, and use of it is purely at your own risk. By purchasing and using this product, you acknowledge that Hooper’s Beta and its affiliates are not liable for any injuries, damages, or complications that may arise from its use. If you have a finger injury or suspect a pulley injury, we strongly recommend consulting a licensed healthcare provider or hand specialist before using any support device.
This is the STL file for printing your own claw/talon hold for lumbrical recovery.
See a demo of this type of hold being used in our lumbrical recovery video: https://youtu.be/J2Q8iCcvBa4
Key Features
Taller than other similar holds on the market in order to accommodate for larger hands without affecting function for smaller hands
8mm rope hole and large recess to prevent the knot from blocking your grip
Key part of lumbrical recovery as it allows you to load the lumbricals without shifting them
Smooth surface encourages better engagement of the lumbricals compared to a relying on skin friction with a grippier surface
Minimum recommended print settings (PLA, PETG):
5 walls
5 bottom layers
15% infill.
DISCLAIMER:
This product is not a medical device and has not been evaluated or approved by any regulatory authority or third party. These products are not intended to diagnose, treat, cure, or prevent any disease or injury, and should not be considered a substitute for professional medical advice, diagnosis, or treatment. We cannot guarantee the safety, performance, or effectiveness of this product, and use of it is purely at your own risk. By purchasing and using this product, you acknowledge that Hooper’s Beta and its affiliates are not liable for any injuries, damages, or complications that may arise from its use. If you have a finger injury or suspect a pulley injury, we strongly recommend consulting a licensed healthcare provider or hand specialist before using any support device.